We thought we’d take a moment to share a few favorites from the editors at Windpower Engineering & Development magazine.

Kymeta’s Steve Sybeldon talks with Windpower Engineering & Development Editor Paul Dvorak about mTenna technology at WINDPOWER 2018.

Never off the grid
Kymeta Corporation showcased its mTenna antenna, a new mobile satellite communications technology that is distributed by FMC GlobalSat for wind farms and other often-remote locations.

Kymeta’s mTenna antenna subsystem modules offer flexibility of integration and installation for a wide range of high-data-rate applications. The antenna modules feature metamaterials-based holographic beam forming and tracking (no moving parts) and Tx/Rx on one single aperture.

This is good news for industries that need access to easy-to-use, reliable mobile communications. Just ask Bill Gates – he’s one of the company’s original investors, said Kymeta’s Steve Sybeldon during the WINDPOWER 2018 show.

The GW 3MW(S) test turbine is installed at the UL Advanced Wind Turbine Test Facility at West Texas A&M University.

Unveiling a turbine prototype
Goldwind Americas held a press conference at the show to announce installation of its GW 3MW(S) Smart Wind turbine test unit at the UL Advanced Wind Turbine Test Facility located at West Texas A&M University. The scalable 3-MW test turbine works at a height of 130 m and has a blade tip height of 199.2 m, reportedly the highest-reach wind turbine in the United States.

The onshore turbine prototype features scalable rated capacity of up to 3.57 MW and a rotor diameter of 136 m. LM Wind Power supplied the blades and Broadwind Energy built the tower components.

Disposable urinal bags from Brief Relief can help wind technicians find relief when it’s least convenient.

A better bathroom break
One part of wind technicians’ work we don’t ordinarily think about involves restroom breaks. So what do employees do when nature calls 100 m up?

Brief Relief was on hand at WINDPOWER 2018 to showcase its line of portable lavatory supplies, including the company’s disposable urinal bag that turns liquid into gel and is trash container-safe. Brief Relief’s Lou Ortego said the company was receiving good response from attendees who stopped by their booth to view the portable restroom products. The company also sells solutions for solid waste and privacy.

Fleet Monitor is a hardware-brand-independent software platform for condition monitoring and predictive maintenance.

Advancing analytics
Predictive analytics partner ONYX InSight highlighted an advanced monitoring digital platform for U.S. wind-power producer BP Wind Energy. To date, 10 of BP’s wind farms in the United States (totaling 1.2GW) have incorporated ONYX InSight’s Fleet Monitor platform into their operations.

Fleet Monitor combines data streams from multiple drivetrain technologies, enabling project owners to detect developing component failures months before action is required. The monitoring platform also helps owners predict the remaining useful life of components and make informed decisions about where and when to send out inspection and repair teams.

The 4.2M140 is suited for low- and medium-wind conditions, while the 4.2M148 is designed for low-wind conditions.

Senvion’s low-wind 4.2-MW platform
Senvion showcased its 4.2-MW platform at the WINDPOWER 2018 conference. The 4.2M140 and 4.2M148, based on the company’s 3.XM series, are best suited for low- and medium-wind sites, according to company reports.

The 4.2M140 and 4.2M148 turbines feature lighter, longer, and more efficient rotor blades, and the company’s dynamic control technologies enable the new turbines to maximize energy production and adapt to specific regional requirements such as noise.

Kaeufer Blade Access Systems from Wind Access Engineering.

Sensible scaffolding
Wind Access Engineering displayed its impressive Kaeufer Blade Access Systems, versatile mobile platforms that facilitate the inspection, repair, and maintenance of wind turbine blades.

These platforms can be customized to fit any utility-scale wind energy towers, according to the company. Workers can control winches with precision, allowing for safe maneuvering close to the blade along its entire length.

The platforms are also easy to transport and can be assembled and erected on any surface. They are powered by electric winches and can climb to any heights.

The U.S. Department of Energy Collegiate Wind Competition challenges interdisciplinary teams of undergraduate students from a variety of programs to offer a unique solution to a complex wind energy project.

College competitors
It was exciting to see the California State University Maritime Academy beat out 11 other teams to claim top honors at the Department of Energy’s Collegiate Wind Competition held at WINDPOWER 2018. This competition is aimed at providing undergraduates with real-world skills needed to enter tomorrow’s renewable energy workforce. Teams designed, built, and tested a wind turbine, conducted market research, developed a business plan, and sited a wind farm. All products were judged by a panel of wind industry leaders.

Second-place winner was Pennsylvania State University. Learn more about all of this year’s competitors here.

Also on the show floor…
Aztec Bolting Services featured its new tool trade-in program at the show, which lets users turn in old competitors’ tools to receive up to a $750 discount on a new Enerpac product…

…and GE Renewable Energy entertained visitors with an amazing virtual reality experience, right at the company’s booth at WINDPOWER 2018.

All said, WINDPOWER 2018 featured the latest technologies that are powering the global wind energy industry. Be sure to attend WINDPOWER 2019, which will be held May 20 to 23, 2019, in Houston.

The post WINDPOWER 2018 recap appeared first on Windpower Engineering & Development.

The Generational Electric Tensioner Pump, model VETP, is a new bolt-tension pump with a lighter weight, about 69 lb, a figure that is about half of competing products. Other features include a certified one-point lift, a 12 x 12 x 8 in. reservoir, about 21 in. height, user-adjustable pressure control from 0 to 22,000 psi, and a pressure safety valve. Benefits include a portable and compact design with fast pressure up and retract. The pump is a collaboration of Aztec and a local manufacturer.

Aztec Bolting
www.aztecbolting.com

The post Bolt tension pump lighter than competitors appeared first on Windpower Engineering & Development.

A few features on the new tensioner pump include the fast pressure-up and retract, a hi-tech and calibrated digital gauge, multi-functional and intrinsically safe remote control, and certified one point lift.

Aztec Bolting Services Inc., a leading provider of bolting tools to the natural gas, oil, petrochemical, and wind energy industries for the past 25 years, has announced its latest tool, a new generation electric tensioner pump designed for critical bolting applications, specifically in the wind and power generation industries.

“This pump is taking tensioning to a new era,” said Larry Garza, Owner of Aztec Bolting Services Inc. “The tool has a unique footprint –  it is 65% smaller than anything on the market. Portability and compact design are key in our industry and this tool has them both.”

Other key design features include the fast pressure-up and retract, a hi-tech and calibrated digital gauge, multi-functional intrinsically safe remote control, and certified one point lift. “We continue to listen to our customers and collaborate with the best companies to produce leading edge products to fulfill their needs,” concluded Garza.

Aztec Bolting Services Inc www.AztecBolting.com

The post Aztec Bolting Services releases new electric tensioner pump appeared first on Windpower Engineering & Development.